Hacks on amp setting
The quest for tone is endless. Like what amp to use, what pedal to buy, what type and/or brand of guitar, what brand and/or gauge of strings, what pick, what lead or cable to use, etc. etc. etc. The simple answer to it is.... You are the tone. It starts in your brain as a concept or idea then it translates to your ear as an aural perception. Then that's the time you buy stuff and try to tweak, adjust, setup to your liking. Your fingers are the accessories because there are people that use their toes to play guitar or some appendages to strum or pluck the strings for example Tony Iommi got prosthetic fingertips. But, it didn't stop him from playing the guitar or hindered the tone that he wants for his guitar. Right, having said that, let's crack on and get your gear out, whatever it is.
Plug your guitar to your amp and start tweaking your amp. Normally, amp got Master Volume, Equalisation either Treble, Mid and Bass or just Treble and Bass and at times just one Tone control. Then some amps got a Gain and a separate Volume control for that gain. Other times, amp got channel control or switch for Clean and Crunch or Overdrive.
Master Volume: This determine the loudness of the amp so it depends on the room size your playing or the person your jamming with. So adjust accordingly. Start at low level especially when your practising on your own. When you want to get a decent Clean Tone, put your volume between 4-5 or 10 to 12 o'clock. If you want a bit of dirt/overdrive, lower your Master volume to 1-2 and increase your gain and volume.
Gain control: Some amps as I've said earlier got 1 gain and 1 separate volume control. Others got two gain controls like this practise amp Park G10. But I guess, Gain 1 is your volume and Gain 2 is your overdrive or actual gain. I suggest you turn gain 1 up to 1/4 or about 3 and gain 2 on 0. Just to get the right volume for the amp. Then, try to fiddle with gain 2 and decide on how crunchy or dirty you want your amp. If you are a blues fan, perhaps put gain 2 on 1/4 to 1/2 (between 9 to 12 o'clock) and if you are more of a heavy rock or metal fan then turn your gain 2 to 3/4 or full blast.
Equalisation: This is where the fun begins when you are looking for tones. The most common EQ setting is putting the treble, mid and bass on 12 o'clock. Then, from there, start turning the bass up to 3/4 or 3 o'clock and then try it full, and see how the amp as well as the speaker handles it. Next, try and turn treble starting from 0 all the way to full blast. Listen and find out which one you like it the most. Then, same goes with your mid, try to turn it down to 0 and work your way up to 1 o'clock. I never put mid full blast but I suppose if you put bass and treble full blast then surely you can with the mid but then again it will just be the same as putting it all on 12 o'clock.
Your Guitar: There are a lot of factors on your guitar, like the pickups, the height of the pickups. Also the strings albeit the type of strings ang/or gauge. The neck length or the scale length. The type of wood from body to fretboard. If it is solid, semi-hollow or hollow guitar. And a lot more. But, will talk about the obvious like the volume control, the tone knobs and the toggle switch for the pickups. Start on which pickup you like the most, i.e. neck or bridge, both or just the middle pickup. Then dial the tone knob of your guitar from 0-10. Find which tone you like the most. Also volume knob plays a great role especially if your amp is a tube amp. You can push your amp's gain and then lower your volume from your guitar. There are tons of techniques and information to learn and know. Keep trying, keep experimenting. Good luck!
