Universal mini SoundSak - a simple alternative solution for your Yamaha Stagepas 400BT as a carry bag or cover. Found this online and thought this might bit a cheap inexpensive carry bag for my Yamaha Stagepas 400BT. Bought it and tried it on. It's not perfect fit but, as a cover and something to protect the speakers, I think it's quite a good choice. Please watch the video and subscribe. Thank you!
I did this patch by accident. I was actually aiming to copy an infinite sustain sound effects but ended up doing this violin sound effects. I edited the patch called SloSustain which I also created before, but there's also a preset patch called PartyViola (H4) and you can edit that one into this Violin effects for electric guitar.
Z Clean: Gain 95, Tone 66, Level 150 I60 Comp: THRSH -35, Ratio 4.0, Gain 12, Knee Soft, Level 100 HD Hall: PreD 45, Decay 26, Mix 20, LoDMP 36, HiDMP 63, Tail On
Detune: Cent -10, PreD 17, Mix 47, Tone 7, Level 100
Verse/Chorus: MERSEYBEAT
VX Combo: Gain 20, Tube 40, Level 110, T 35, M 55, B 50, Prese 37, CAB VX Combo 2x12, Out Line SuperCho: E. Lvl 50, Rate 50, Depth 50, EQ 50, Mode Mono Spring63: Dwell 7, Mixer 14, Tone 41, Level 100
The Ikea Knagglig wooden box is a perfect fit for this project. It is exactly the right size for Zoom G1xOn. Screws included. All you need to do is cut a piece of wood that would fit and elevate one side of the platform. Then a non-slip rubber for chairs and tables. But if you want your Zoom G1xOn to be permanent on the pedalboard, you can use a Velcro and stick it to the unit. That way it is much secured. The purpose of this pedalboard is to make the Zoom G1Xon in a certain angle that is going to be easy for your foot as well as your eyes when you're looking down. Apart from that, you don't really need a pedalboard for your Zoom G1xOn, because you can use it as it is.
The challenge or downside is that the screw holes are almost at the edge, so when you screw it on a piece of wood, it might crack it because of the location plus the size of the screw. The remedy would be extend your piece of wood or get a bigger flat wood like 2 x 2, so that it wont crack. But, it will be over the platboard. Another way may be is to drill on that piece of wood, so that it won't crack.
Hope this helps and gives you some ideas on how to DIY a pedalboard for your Zoom G1xOn.
