1. You need to remove the label first and turn it up to open the bottom side by removing or tearing the cardboard that holds the contents in.
2. Remove everything starting from the parts that are in the individual plastic bags, as well as the loose parts and the hose itself.
3. You need to decide on which side you want the handle to put. Then open the plastic bags and locate for the handle and start assembling.
4. There's an instruction on a piece of paper if you wanted a guide on how to assemble the handle but it's actually straight forward.
5. Next step is to slip the hose in between the rollers and pull it out underneath. Then, locate for the spring and other contents that are needed for that hose end to hook or assemble to the reel.
6. Once you managed to connect it, try and roll the hose in using the handle that you've just assembled that way you can test to make sure it's all working good.
7. Now, you need to cut 1.5m of hose which you will use later to connect this Hozelock 2-in-1 to your tap. You need to assemble the remaining connectors and secure it tightly.
8. If in doubt, just double check it from the video.
No comments:
Post a Comment