The Ikea Knagglig wooden box is a perfect fit for this project. It is exactly the right size for Zoom G1xOn. Screws included. All you need to do is cut a piece of wood that would fit and elevate one side of the platform. Then a non-slip rubber for chairs and tables. But if you want your Zoom G1xOn to be permanent on the pedalboard, you can use a Velcro and stick it to the unit. That way it is much secured. The purpose of this pedalboard is to make the Zoom G1Xon in a certain angle that is going to be easy for your foot as well as your eyes when you're looking down. Apart from that, you don't really need a pedalboard for your Zoom G1xOn, because you can use it as it is.
The challenge or downside is that the screw holes are almost at the edge, so when you screw it on a piece of wood, it might crack it because of the location plus the size of the screw. The remedy would be extend your piece of wood or get a bigger flat wood like 2 x 2, so that it wont crack. But, it will be over the platboard. Another way may be is to drill on that piece of wood, so that it won't crack.
Hope this helps and gives you some ideas on how to DIY a pedalboard for your Zoom G1xOn.
No comments:
Post a Comment